SiS Graphic Card Support (771/671 PCIE VGA)

[anon222]

Linux Lite 1.0.8 is Ubuntu 12.04 LTS based.
However, before installing LL 1.0.8, you can try creating xorg.conf file as suggested in the link I've posted.
Open a Terminal and create a xorg.conf file

Code:

sudo leafpad /etc/X11/xorg.conf

It will open a text editor with elevated user privileges.
Now copy and paste this configuration in it

Code:

Section "Device"
  Identifier "Generic Video Card"
    VendorName  "Silicon Integrated Systems [SiS]"
        BoardName   "771/671 PCIE VGA Display Adapter"
    Busid "PCI:1:0:0"
    Driver "vesa"
    Screen 0
        Option "UseFBDev" "true"
        Option "DPMS"
        Option "ShadowFB"
        Option "MaxXFBMem"
        VideoRam 262016
        Option "RenderAccel" "true"
        Option "AllowGLXWithComposite" "true"
        Option "backingstore" "true"
        Option "AddARGBGLXVisuals" "True"

EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
    Vendorname    "Generic LCD Display"
    Modelname    "LCD Panel 1280x800"
    HorizSync 20-107
        VertRefresh 50-185
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1280x768@60" 80.14 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
  modeline  "1280x720@60" 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
  modeline  "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
    Gamma    1.0
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor        "Configured Monitor"
    Device        "Configured Video Device"
    Defaultdepth    24
    SubSection "Display"
        Depth    24
        Virtual    1280    768
        Modes        "1280x768@60"    "1280x720@60"    "800x600@60"    "1280x800@60"    "800x600@56"
    EndSubSection
EndSection

Section "Module"
    Load "dri"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "GLcore"
    Load "i2c"
    Load "bitmap"
    Load "ddc"
    Load "int10"
    Load "vbe"
    Load "speedo"
    Load "record"
EndSection

Section "DRI"
        Mode 0666
EndSection

Save the file and reboot.
You can select the resolution if you Open the Whisker Menu > Settings > Display