How do I get a usb stick with linuxlite 3.4 to boot up on a windows 10 HP?

[firenice03]

[size=1em]Although similar issues - you may still want to open a new thread.. BUT....
[/size]

I say half solved. I was wanting to install as a dual boot & when the install of LL reaches the install options it says:

'This computer currently has no detected operating system, what would like to do?'

So I don't get the option to install alongside, only erase disc & install.

I would rather dual boot. Any Ideas?

Yes you're closer than you know
Windows is installed in UEFI/Secureboot and LL will be installed in default BIOS... Both will reside on the same system but they have different front ends they won't see each other.
BIOS isn't UEFI, they're separate boot ups ... Hense why no prompt for along side.


You can move forward with LL install as normal. If you want to boot to Windows go back in and enable UEFI Windows will be available.. Legacy BIOS LL will be available. They wont be side by side as with Legacy installed Windows & LL..


You could reinstall Windows in Legacy mode to have both without changing BIOS options OR
You can search the forums for UEFI and see how others have gone around..
Here's one tutorial
https://mityer.khdlhfjijfrupr.tk/forums/tutor...y-enabled/

[trinidad]

https://www.lifewire.com/how-to-access-a...-8-2626229

Start here. The easiest way to fix this is with a Windows 10 installation disk. If not try some of the suggestions above. You are having an EFI problem that is not really the fault of EFI. On some EFI Windows installations UEFI will not release the media channel because of BIOS bugs are the fault of the OEM. In other words even though you enable Legacy in the BIOS the Windows 10 UEFI won't recognize the change. You must make the change to Legacy boot from the Windows 10 blue advanced options screen. If you have a Windows 10 Pro installation disk this is easy to do if not you must use one of the other methods to get to the blue screen and UEFI change settings. It should be available if your Windows 10 build is above 1700. Get this part figured out if you can first. It's easy after this if you can get through it but you will have to use the 'other' option in the LL installer when you get that far. Defrag Windows before you do anything. Shrink your Windows partition from Windows and leave the resulting empty space unformatted and unallocated. Do not use gparted to do this. Use Windows disk tools. The rest is cake.

TC

[gold_finger]

@ pingball57,


Going to expand on what firenice03 said.


LL can not (easily) be installed in UEFI mode, but can be installed in Legacy mode.  Result -- you won't be offered choice of which OS to boot on each startup.  Instead, to boot Windows set computer to boot in UEFI mode; to boot LL, set computer to boot in Legacy/CSM mode.  However, you said:

There is a comments box next to all this that reads:
When legacy  support is enabled, UEFI Boot order & legacy boot order are both avaiable and UEFI boot order has higher priority than legacy boot order.

So, I'm not 100% sure that computer will allow booting LL after install if it automatically looks for an gives priority to UEFI installed systems.  (Only way to find out is to install LL and try booting to it afterwards.)

EDIT:  Just saw trinidad's post after posting this.  Maybe info he posted would solve problem booting LL in Legacy mode if you run into any problems.

My recommendation is to NOT select any install option for LL to automatically install to the disk, because it might wipe out Windows accidentally.  Instead use the "Something Else" manual installation choice where you can manually direct exactly where LL gets installed.


BEFORE INSTALLING, boot into Windows and do the following:

• Use disk management to shrink main Windows partition (probably "C:drive") to make room for LL installation.  Free up at least 20-25GB; 50-100GB or more is preferable if you have room for that.  DO NOT create any partitions in the resulting free space -- leave unformatted and unpartitioned.
  
• If you haven't already done so, create a Windows Recovery USB to have in case of emergency.
  
• If you haven't already done so, create a Windows Installation USB to have in case of emergency.
  
• Turn OFF Windows Fast Startup, which is on by default in Windows 8-10 systems.
  

To install LL follow this tutorial for installing in Legacy mode to GPT formatted disks.  Skip warnings about Windows in the tutorial.  Go straight down to "Instructions" heading for the install.  Skip first few steps about wiping out current partitions on the drive and creating a new GPT partition table.  You do not want to do that in your case because you're keeping the Windows OS on the computer.  Instead, open GParted program as described, then skip down to "Make your new partitions" step and proceed from there.

[trinidad]

https://www.tenforums.com/tutorials/8519...-bios.html

https://www.tenforums.com/tutorials/5831...-10-a.html

Let's verify what's actually installed here first and then check the firmware version.

TC