[onnipoika]

I installed LL, but after the install should have been finished I restarted my computer and everything seemd normal. But after I had once shutdown and removed the usb I got LL from my laptop opened to the BIOS menu and the ssd I installed LL to was not detected.
When I am in the live version of LL it detects my laptops ssd as a sd card reader and when I look into it all the LL files are there, but I can't boot to it.
please, help!

[TheDead]

I don't know the command to check but maybe the SSD stayed partitionned in GPT/UEFI mode in some way.
It can be read in LL but not booted from.

Cheers!

[rokytnji]

When I am in the live version of LL it detects my laptops ssd as a sd card reader and when I look into it all the LL files are there, but I can't boot to it.

Code:

$ sudo lsblk NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT sda      8:0    0 55.9G  0 disk ├─sda1  8:1    0 48.1G  0 part /home └─sda2  8:2    0  7.8G  0 part / sr0    11:0    1 1024M  0 rom  $ sudo parted -l Model: ATA KINGSTON SV300S3 (scsi) Disk /dev/sda: 60.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Disk Flags: Number  Start  End    Size    Type    File system  Flags 2      1049kB  8390MB  8389MB  primary  ext4 1      8390MB  60.0GB  51.6GB  primary  ext4

Just giving you a example of what you should post next. While running in live session.

Code:

$ sudo fdisk -l Disk /dev/sda: 55.9 GiB, 60022480896 bytes, 117231408 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x4322667d Device    Boot    Start      End  Sectors  Size Id Type /dev/sda1      16386048 117229567 100843520 48.1G 83 Linux /dev/sda2          2048  16386047  16384000  7.8G 83 Linux