[Asif Ansari]

Yeah, It progressed a little bit, now stuck at this screen

[kpanic]

Ok, looks better but you may need to give some additional boot parameters.

Please try first 'Safe Mode' and add the acpi=off there too..

[Asif Ansari]

Thanks a lot man!!!
It worked in safe mode!
Booted into LL 4.0.
Trying to install, But I guess I'll get similar error while booting after installation.
Let's see how it goes after the installation.

[kpanic]

Good to hear that man!

Don't worry about it, you can disable the acpi when you have installed.
Let it install but don't reboot yet!

Let me know when it's finished and I'll tell you what to do next...

[Asif Ansari]

Yeah, it got installed asking for a reboot.
I'm waiting...

[kpanic]

Ok, great!

Don't reboot yet.
Open a console and command

Code:

dmesg | less

There is a line in the start that begins with the words 'Command line'.
Please copy the whole line and post it here

[Asif Ansari]

Replying from the LL 4.0 itself  ;D ;D

Command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/custom.seed boot=casper xforcevesa nomodeset initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw noapic noapci nosplash irqpoll --acpi=off

[kpanic]

Cool

Now - using the console again - command:

Code:

mount | grep /dev/sd

Please post output

[Asif Ansari]

/dev/sdc1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)

[kpanic]

Ok, you must mount the hard drives too, otherwise you must boot the first boot using the grub editing again..

Please command:

Code:

gdisk /dev/sda

then press 'p' followed by ENTER and copy the lines here

(after 'p' you may press 'q' followed by ENTER to exit gdisk)