[Warde Hayden]

Where I get a download for my Creative Labs Audigy2 Sound Blaster card

[valtam]

We'll need to know the exact model first.

Code:

aplay -l

Code:

cat /proc/asound/cards

Code:

lspci -v | grep -i audio

[Warde Hayden]

Thank you, on the chip it says Audigy2 CA0102-ICT LF CREATIVE TECH '01 59AB5LW, on the board it says MODEL SB0350, Thank you for any help you can give me

[valtam]

We'll need the output from the Terminal please, not the chip or board information.

[Warde Hayden]

Is this what I need to give you? I'm not real swift on the command line entry yet.


card 0: Audigy2 [SB Audigy 2 ZS [SB0353]], device 3: emu10k1 [Multichannel Playback

0 [Audigy2        ]: Audigy2 - SB Audigy 2 ZS [SB0353]
                      SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xac00, irq 16

03:08.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)

[valtam]

Type each command into the Terminal, then copy and paste ALL the text into the Forums. Do that for all 3 commands I listed. Do not miss any text, otherwise it makes supporting you harder. Use the code tags. When you joined, you would have received a Welcome email. Please look through that for 'how to's' in particular Posting Guidelines.

[Warde Hayden]

Code:

warde@warde-EX327AA-ABA-M7557C:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Audigy2 [SB Audigy 2 ZS [SB0353]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]   Subdevices: 32/32   Subdevice #0: subdevice #0   Subdevice #1: subdevice #1   Subdevice #2: subdevice #2   Subdevice #3: subdevice #3   Subdevice #4: subdevice #4   Subdevice #5: subdevice #5   Subdevice #6: subdevice #6   Subdevice #7: subdevice #7   Subdevice #8: subdevice #8   Subdevice #9: subdevice #9   Subdevice #10: subdevice #10   Subdevice #11: subdevice #11   Subdevice #12: subdevice #12   Subdevice #13: subdevice #13   Subdevice #14: subdevice #14   Subdevice #15: subdevice #15   Subdevice #16: subdevice #16   Subdevice #17: subdevice #17   Subdevice #18: subdevice #18   Subdevice #19: subdevice #19   Subdevice #20: subdevice #20   Subdevice #21: subdevice #21   Subdevice #22: subdevice #22   Subdevice #23: subdevice #23   Subdevice #24: subdevice #24   Subdevice #25: subdevice #25   Subdevice #26: subdevice #26   Subdevice #27: subdevice #27   Subdevice #28: subdevice #28   Subdevice #29: subdevice #29   Subdevice #30: subdevice #30   Subdevice #31: subdevice #31 card 0: Audigy2 [SB Audigy 2 ZS [SB0353]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]   Subdevices: 8/8   Subdevice #0: subdevice #0   Subdevice #1: subdevice #1   Subdevice #2: subdevice #2   Subdevice #3: subdevice #3   Subdevice #4: subdevice #4   Subdevice #5: subdevice #5   Subdevice #6: subdevice #6   Subdevice #7: subdevice #7 card 0: Audigy2 [SB Audigy 2 ZS [SB0353]], device 3: emu10k1 [Multichannel Playback] This is everything   Subdevices: 1/1   Subdevice #0: subdevice #0 card 0: Audigy2 [SB Audigy 2 ZS [SB0353]], device 4: p16v [p16v]   Subdevices: 1/1   Subdevice #0: subdevice #0

Code:

warde@warde-EX327AA-ABA-M7557C:~$ cat /proc/asound/cards 0 [Audigy2        ]: Audigy2 - SB Audigy 2 ZS [SB0353]                       SB Audigy 2 ZS [SB0353] (rev.4, serial:0x10031102) at 0xac00, irq 16

Code:

warde@warde-EX327AA-ABA-M7557C:~$ lspci -v | grep -i audio 03:08.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) warde@warde-EX327AA-ABA-M7557C:~$

[valtam]

Please use the code tags next time, I've tidied up your the text you pasted from the Terminal. Ok, to answer your initial question, you don't need a driver for this card, it is already built into the OS (emu10k1).