[Marko94]

Hi all,

After I installed Linux Lite 5.8 I figured that my touchpad doesnt work. Mostly I am using my mouse, but I want touchpad .

It is even didnt registered in the settings.

What to do ?

Code:

System:   Host: SoSmooth Kernel: 5.16.0 x86_64 bits: 64 compiler: N/A   parameters: BOOT_IMAGE=/boot/vmlinuz-5.16.0   root=UUID=37aafaac-d3fa-4fa3-b80d-291e79215f69 ro quiet splash   vt.handoff=7   Desktop: Xfce 4.14.2 tk: Gtk 3.24.13 info: xfce4-panel wm: xfwm4   dm: LightDM 1.30.0 Distro: Linux Lite 5.8 LTS   base: Ubuntu 20.04.3 LTS (Focal Fossa) Machine:   Type: Convertible System: HP product: HP ENVY x360 Convertible 13-ar0xxx   v: N/A serial: <superuser/root required> Chassis: type: 31   serial: <superuser/root required>   Mobo: HP model: 85DE v: 41.36 serial: <superuser/root required> UEFI: AMI   v: F.23 date: 02/05/2021 Battery:   ID-1: BAT0 charge: 44.1 Wh condition: 44.1/44.1 Wh (100%) volts: 17.4/15.4   model: 333-2B-49-A KC04053XL type: Li-ion serial:  1655 status: Full Memory:   RAM: total: 5.74 GiB used: 3.75 GiB (65.3%)   RAM Report:   permissions: Unable to run dmidecode. Root privileges required. CPU:   Topology: Quad Core model: AMD Ryzen 5 3500U with Radeon Vega Mobile Gfx   bits: 64 type: MT MCP arch: Zen+ family: 17 (23) model-id: 18 (24)   stepping: 1 microcode: 8108109 L2 cache: 2048 KiB bogomips: 33537   Speed: 1263 MHz min/max: 1400/2100 MHz boost: enabled Core speeds (MHz):   1: 1291 2: 1269 3: 1360 4: 1272 5: 1609 6: 1417 7: 1131 8: 1392   Flags: 3dnowprefetch abm adx aes aperfmperf apic arat avic avx avx2 bmi1   bmi2 bpext clflush clflushopt clzero cmov cmp_legacy constant_tsc cpb   cpuid cr8_legacy cx16 cx8 de decodeassists extapic extd_apicid f16c   flushbyasid fma fpu fsgsbase fxsr fxsr_opt ht hw_pstate ibpb irperf   lahf_lm lbrv lm mca mce misalignsse mmx mmxext monitor movbe msr mtrr   mwaitx nonstop_tsc nopl npt nrip_save nx osvw overflow_recov pae pat   pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_llc perfctr_nb   pfthreshold pge pni popcnt pse pse36 rapl rdrand rdseed rdtscp rep_good   sep sev sev_es sha_ni skinit smap smca sme smep ssbd sse sse2 sse4_1   sse4_2 sse4a ssse3 succor svm svm_lock syscall tce topoext tsc tsc_scale   v_vmsave_vmload vgif vmcb_clean vme vmmcall wdt xgetbv1 xsave xsavec   xsaveerptr xsaveopt xsaves   Vulnerabilities: Type: itlb_multihit status: Not affected   Type: l1tf status: Not affected   Type: mds status: Not affected   Type: meltdown status: Not affected   Type: spec_store_bypass   mitigation: Speculative Store Bypass disabled via prctl   Type: spectre_v1   mitigation: usercopy/swapgs barriers and __user pointer sanitization   Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional, STIBP:   disabled, RSB filling   Type: srbds status: Not affected   Type: tsx_async_abort status: Not affected Graphics:   Device-1: AMD Picasso vendor: Hewlett-Packard driver: amdgpu v: kernel   bus ID: 04:00.0 chip ID: 1002:15d8   Display: x11 server: X.Org 1.20.13 driver: amdgpu,ati   unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz   OpenGL:   renderer: AMD Radeon Vega 8 Graphics (raven LLVM 13.0.0 DRM 3.44 5.16.0)   v: 4.6 Mesa 22.0.0-devel (git-d4b6d03 2022-02-02 focal-oibaf-ppa)   direct render: Yes Audio:   Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Hewlett-Packard   driver: snd_hda_intel v: kernel bus ID: 04:00.1 chip ID: 1002:15de   Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor   vendor: Hewlett-Packard driver: snd_pci_acp3x v: kernel bus ID: 04:00.5   chip ID: 1022:15e2   Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard   driver: snd_hda_intel v: kernel bus ID: 04:00.6 chip ID: 1022:15e3   Sound Server: ALSA v: k5.16.0 Network:   Device-1: Realtek RTL8822BE 802.11a/b/g/n/ac WiFi adapter   vendor: Hewlett-Packard driver: rtw_8822be v: N/A port: f000   bus ID: 02:00.0 chip ID: 10ec:b822   IF: wlo1 state: up mac: 40:23:43:82:63:bf   IP v4: 192.168.0.32/24 type: dynamic noprefixroute scope: global   broadcast: 192.168.0.255   IP v6: fe80::4eab:1d5c:18f9:81d3/64 type: noprefixroute scope: link   WAN IP: 109.60.127.167 Drives:   Local Storage: total: 476.94 GiB used: 30.73 GiB (6.4%)   SMART Message: Required tool smartctl not installed. Check --recommends   ID-1: /dev/nvme0n1 vendor: Intel model: SSDPEKNW512G8H size: 476.94 GiB   block size: physical: 512 B logical: 512 B speed: 31.6 Gb/s lanes: 4   serial: BTNH94200JQV512A rev: HPS0 scheme: GPT   Message: No Optical or Floppy data was found. RAID:   Message: No RAID data was found. Partition:   ID-1: / raw size: 196.98 GiB size: 192.89 GiB (97.92%)   used: 7.26 GiB (3.8%) fs: ext4 dev: /dev/nvme0n1p2 label: N/A   uuid: 37aafaac-d3fa-4fa3-b80d-291e79215f69   ID-2: /boot/efi raw size: 571.0 MiB size: 569.9 MiB (99.80%)   used: 8.6 MiB (1.5%) fs: vfat dev: /dev/nvme0n1p1 label: N/A   uuid: 95F7-30E6   ID-3: /home raw size: 268.22 GiB size: 263.01 GiB (98.06%)   used: 23.40 GiB (8.9%) fs: ext4 dev: /dev/nvme0n1p3 label: N/A   uuid: 7757319d-2404-488c-9adf-807d2c85b0d6   ID-4: /run/timeshift/backup raw size: 268.22 GiB   size: <superuser/root required> used: <superuser/root required> fs: ext4   dev: /dev/nvme0n1p3 label: N/A uuid: 7757319d-2404-488c-9adf-807d2c85b0d6   ID-5: swap-1 size: 11.18 GiB used: 53.0 MiB (0.5%) fs: swap   swappiness: 60 (default) cache pressure: 100 (default) dev: /dev/nvme0n1p4   label: N/A uuid: ec6df384-f1b5-4016-9659-b7e7873d7949 Unmounted:   Message: No unmounted partitions found. USB:   Hub: 1-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0   speed: 480 Mb/s chip ID: 1d6b:0002   Device-1: 1-3:4 info: SHARKOON 2.4G Mouse type: Mouse   driver: hid-generic,usbhid interfaces: 1 rev: 1.1 speed: 12 Mb/s   chip ID: 1ea7:0064   Device-2: 1-4:3 info: Synaptics type: <vendor specific> driver: N/A   interfaces: 1 rev: 2.0 speed: 12 Mb/s chip ID: 06cb:00d2   serial: acef940dc72a   Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 speed: 10 Gb/s   chip ID: 1d6b:0003   Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 rev: 2.0   speed: 480 Mb/s chip ID: 1d6b:0002   Device-3: 3-1:2 info: Lite-On HP Wide Vision HD Camera type: Video   driver: uvcvideo interfaces: 2 rev: 2.0 speed: 480 Mb/s chip ID: 04ca:709d   Device-4: 3-2:3 info: Realtek Bluetooth Radio type: Bluetooth   driver: btusb interfaces: 2 rev: 1.1 speed: 12 Mb/s chip ID: 0bda:b00b   serial: 00e04c000001   Hub: 4-0:1 info: Full speed (or root) Hub ports: 1 rev: 3.1 speed: 10 Gb/s   chip ID: 1d6b:0003 Sensors:   Message: No sensors data was found. Is sensors configured? Info:   Processes: 280 Uptime: 1h 27m Init: systemd v: 245 runlevel: 5 Compilers:   gcc: 9.3.0 alt: 9 Shell: bash v: 5.0.17 running in: xfce4-terminal   inxi: 3.0.38