Linux Lite 8.0 RC2 has been released - Click here


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Linux Lite 8.0 RC2 Released
#1

Release Announcement

Linux Lite 8.0 RC2 is now available for testing.

This RC2 closes a small set of install-time and post-install bugs that surfaced during RC1 testing. Please retest the install paths you use most — fresh install, OEM, and report anything off in this Thread.

See below for more details.
A full write-up with images will be in the Final Forum announcement on 1st June.

Linux Lite 8.0 Final will be released on 1st June, 2026.


Linux Lite 8.0 - RC2
================

Base: Ubuntu 26.04 LTS (Resolute)
Desktop: XFCE with LightDM
Codename: Hematite
Kernel: Linux 7.0.0-g6e9e6ef4c595-2_amd64 (Linux Lite Advanced Performance Kernels)


CHANGES FROM RC1
--------------------------------

- Calamares fixes.

- Lite Distro Builder fixes.

- Kernel 7.1.0-rc1-linuxlite_7.1.0-rc1-1linuxlite_amd64 available from Lite Kernel Manager. We built an RC1 kernel because 7.1 has many useful new features, including:

Beginning to retire Intel 486 CPU support from the mainline kernel
Intel FRED enabled by default (boosts Panther Lake, Diamond Rapids, Zen 6)
AMD CPPC performance priority and dynamic/raw EPP handling
12 new SoCs plus additional ARM and RISC-V hardware platforms mainlined
32-bit ARM real-time (RT) kernel builds now supported in mainline
Beginning removal of Russia's Baikal CPU support
Intel QAT Zstd support and QuickAssist Gen6 hardware improvements
x86_energy_perf_policy tool gains Intel Panther Lake SoC slide support
AMD SBI driver and new SMCA bank types preparing for EPYC Venice
HIGHMEM and other LoongArch improvements
Workaround for Arm C1-Pro processor erratum
Experimental pKVM protected guest support with KVM
x86/x86_64 aligned with other architectures for custom restart handlers
Idle SMT sibling improvements for sched_ext
Intel LASS (Linear Address Space Separation) deemed production-ready
WQ_AFFN_CACHE_SHARD workqueue improvement for many-core LLC CPUs
Some changes may negatively impact 32-bit systems as 64-bit is prioritised
AMDGPU DC support for GCN 1.1 "Sea Islands" APUs (Kaveri); now default over Radeon driver
New AMD hardware support added to AMDGPU
Intel Nova Lake P graphics enablement
Intel Xe driver gains user-space interface for VRAM pressure/OOM handling
New Coreboot framebuffer DRM driver
Ryzen AI NPU power estimate and per-process memory queries via AMDXDNA
ARM64 NEON-accelerated CRC64-NVMe
Revamped T10 PI data integrity for better read performance
New in-kernel NTFS file-system driver introduced
Fixes and minor changes to Paragon's NTFS3 driver
exFAT reduces file fragmentation plus various fixes
Fixes for XFS, EXT4, and F2FS
JFS data integrity hardening
RAID fixes and IO_uring enhancements
Many Apple HFS/HFS+ fixes
FSMOUNT_NAMESPACE support
Intel IRDMA gains "GEN4" hardware support
Removal of ISDN, ham radio, and other old network drivers (~138K LOC dropped)
UDP-Lite retired
IPv6 can no longer be built as a standalone module
Many MediaTek MT76 WiFi improvements
Support for RTL8157 5Gbit, RTL8125cp, and other new networking hardware
Lenovo Yoga Fan driver (covers Yoga, Legion, Flex, Slim, IdeaPad)
Apple SMC power driver for M-series MacBook battery/power metrics
Sound bus keepers support, advancing Apple Silicon audio
Improved ThinkPad Trackpoint doubletap handling
New Bitland MIFS WMI driver for Chinese laptops
More TUXEDO Computers and Uniwill OEM features
Steam Deck OLED audio finally fixed after two years
Suspend/resume support for legacy ISA sound cards
Various USB device additions
Audio support for Line6 POD HD PRO and NexiGo N930W webcam
Removal of obsolete bus mouse and PCMCIA drivers
Mainline Lenovo Legion Go drivers
More Sony Rock Band hardware via HID
Sensor monitoring for additional ASUS motherboards
New RealSense 3D depth camera and NVIDIA Tegra media drivers
PCIe M.2 power sequencing driver for M.2 Key-E
Removal of old IBM PC110 touchpad driver
Hung task detector counter resettable via /proc/sys/kernel/hung_task_detect_count without reboot
Various memory management and scheduler improvements
HRTIMER high-resolution timer overhaul
More crypto optimisations enabled by default
MMC subsystem changes (previously rejected from 7.0) merged
Sheaves performance regression fixed
Child auto-reap and PIDFD auto-kill flags for clone3()
Removal of unnecessary memory clobbers
user.* xattrs on sockets (for GNOME/systemd)
Experimental Rust inlining helper option
Raised minimum required Rust version

- NEW application, Lite Menu Sorter. An application designed to sort categories alphabetically when they become out of sort order.

- NEW application, Lite Time Date. An application to set the date and time, with optional NTP sync for your region.

- Lite Core - added Samba removal.

- Fastfetch fixed.

- Mozilla Firefox and Thunderbird - we are now hosting these applications, which means the thorn in my side - PPA'S and the mess they can cause are no where to be found in Linux Lite 8.0 RC2.

- Btop replace Htop.

- Keyboard layout chosen during install is now actually applied to the installed system. RC1 wrote the locale but not the keymap, so users picking French/German/etc. would reboot into US/QWERTY. The most visible failure mode was a numeric password being rejected on first login because the install-time and post-reboot keymaps differed. Fixed for every locale.

- BTRFS and XFS filesystems added (by request) These are niche filesystems (both commonly used on servers and storage-heavy systems). Out of the 2 if you have to use one on your desktop or laptop, I'd go with XFS.

- FIX - OEM first-boot autologin tick is now honoured. Ticking "Log in automatically" in the OEM firstboot wizard previously had no effect after reboot.

- FIX - The factory user is now removed on first reboot after OEM firstboot completes.

- A systemd ordering cycle was silently skipping the cleanup unit on RC1.

- Linux Lite archive keyring rolled to a new RSA 4096 key. Fresh installs ship the new key automatically. 7.x users running:

Code:
lite-series-upgrade

to Linux Lite 8.0 also pick it up via the in-package fallback if their network is offline mid-upgrade.

- FIX - GRUB live boot menu, restored centred Linux Lite branding above the menu and tightened the rule rendering.

- New / improved in Lite Driver Manager. A range of Broadcom WiFi chips (BCM4311–BCM4360, including BCM4352) are now offered the proprietary driver as an installable option. The default selection stays "Do not use the device" so the in-tree driver keeps your card working unless you opt in:

Working hardware section

All detected network, graphics, multimedia, and wireless hardware now appears in a collapsible "Working hardware" panel below the action list — so you can see at a glance that Lite Driver Manager has detected your card, even when no driver action is needed.

Unrecognised hardware section.

Any device with no driver bound at all is highlighted up top so you can post a copy-paste line on the forum if you need help.

- Branded application icons - 26 Lite apps received refreshed icons (Driver Manager, Software, Updates, System Monitor, etc.) in their proper Papirus theme sizes and styles.

Dirty Frag Vulnerability - We will patch this in 8.0 Final (already tested on RC2 with 7.0.0-g6e9e6ef4c595-2_amd64 Kernel) for now, read the article and decide if you want to mitigate this.

Source: https://ubuntu.com/blog/dirty-frag-linux...-available

Post-install

Open a Terminal:

Step 1 – block the modules:

Code:
echo "install esp4 /bin/false" | sudo tee /etc/modprobe.d/dirty-frag.conf
echo "install esp6 /bin/false" | sudo tee -a /etc/modprobe.d/dirty-frag.conf
echo "install rxrpc /bin/false" | sudo tee -a /etc/modprobe.d/dirty-frag.conf

Code:
sudo update-initramfs -u -k all

Step 2 – unload modules:

Code:
sudo rmmod esp4 esp6 rxrpc 2>/dev/null

Step 3 – confirm the modules aren’t loaded:

Code:
grep -qE '^(esp4|esp6|rxrpc) ' /proc/modules && echo "Affected modules are loaded" || echo "Affected modules are NOT loaded"

Step 4 – Reboot


BIOS Settings (important)

CSM: Enabled
Secureboot: Disabled

RECOMMENDED PARTITION LAYOUT

Code:
GPT
8MB EXT4 FLAGS - bios-grub (no mountpoint)
512MB FAT32 mountpoint /boot/efi FLAGS - boot
rest-of-partition EXT4 mountpoint / FLAGS - none

or:

If you want to erase the entire disk (BIOS & UEFI supported) choose Erase Disk and everything will be partitioned for you.

IMPORTANT:

Please do Menu > Favorites > Install Updates immediately after a fresh install, there are a number of important updates to some of our Lite applications that will make a difference to your experience.

Known Issues:

Please list them here, this WILL BE the last release before the Final so please, hunt down those bugs and let's squash them!

We'd particularly value bug reports on:


Non-English locale installs (verify your keyboard layout works post-reboot).

OEM install + firstboot path (verify user is gone and your autologin choice took).

Lite Driver Manager on machines with Broadcom WiFi or NVIDIA GPUs.

Installation fails

Please paste the installer log from here:

Code:
/root/.cache/calamares/session.log

BEFORE you reboot or shutdown the computer when experiencing an installation issue..


Huge thank you to our Sponsor:

[Image: 7DbL6Gl.png]

Presale.Codes has presale password information that helps fans, ticket brokers, ticket flippers, concierge desks, personal and virtual assistants and anyone who needs a presale code to find it and use it ASAP. Click the here to learn more.

Downloads:

Release Name: Linux Lite 8.0 RC2
Size: 2.6Gb (DVD, USB)

Download Linux Lite 8.0 RC2 from Sourceforge:

https://sourceforge.net/projects/linux-l...s/8.0/rc2/

HTTP & HTTPS:

Download Linux Lite 8.0 RC2 from one of the mirrors: (some may still be syncing)

China - https://mirrors.sjtug.sjtu.edu.cn/linuxliteos/isos/
Ecuador - http://mirror.ueb.edu.ec/linuxliteos/isos/
Ecuador - https://mirror.cedia.org.ec/linuxliteos/isos//
Germany - http://mirror.alpix.eu/linuxliteos/isos/
Germany - https://mirror.alpix.eu/linuxliteos/isos/
Greece - http://ftp.cc.uoc.gr/mirrors/linux/linuxlite/isos/
Greece - https://fosszone.csd.auth.gr/linuxlite/isos/
Hong Kong - http://mirror-hk.koddos.net/linuxlite/isos/
Hong Kong - https://mirror-hk.koddos.net/linuxlite/isos/
Netherlands - https://mirror.koddos.net/linuxlite/isos/
New Caledonia - http://mirror.lagoon.nc/linuxlite/linuxlite/isos/
Singapore - https://mirror.freedif.org/LinuxLiteOS/isos/
Sweden - http://ftpmirror1.infania.net/linuxlite/isos/
Sweden - https://mirror.accum.se/mirror/linuxliteos.com/isos/
United Kingdom - https://www.mirrorservice.org/sites/repo...lite/isos/
United Kingdom - https://mirror.vinehost.net/linuxlite/isos/
USA - http://mirror.clarkson.edu/linux-lite/isos/

Checking the MD5SUM of the Linux Lite ISO:

Open a Terminal on Linux Lite and do:

Code:
md5sum linux-lite-8.0-rc2-64bit.iso

MD5SUM:

Code:
f7351bf7c9d1efcbca97ae4494bfcfa8

Check that it matches the exact characters in sequence above.


Checking the SHA256 of the Linux Lite ISO:

Open a Terminal on Linux Lite and do:

Code:
sha256sum linux-lite-8.0-rc2-64bit.iso

SHA256:

Code:
d16431792ae0e8f172a4a10bc2502bfd0c366ab106caa3c58e46ff8729b91e4a

Check that it matches the exact characters in sequence above.


TORRENT (Fastest way to download the RC - please help to Seed, thank you)

https://sourceforge.net/projects/linux-l...t/download

64bit Torrent - linux-lite-8.0-rc2-64bit.iso.torrent
Size: 2.6Gb (DVD, USB)
Hash:

Code:
8ca917a3cfcb18ce1862f4f36c1a6b0866ddcced


Live USB/DVD/VirtualBox/Vmware:


Recommended Computer Requirements:

1.5 Ghz Dual Core Processor or greater
4GB ram
40GB HDD/SSD/NVME
VGA, DVI, DP or HDMI screen capable of 1366x768 resolution
DVD drive or USB port for the ISO image
Disable Secure Boot

Login to the live desktop is automatic.

As this is a RC release, there are bound to be bugs etc. Please help make the final stable for other people by participating in this RC. Please report any bugs and feedback in this thread.


Thank you

Jerry and the team.

Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

"Do not correct a fool, or he will hate you; correct a wise man and he will appreciate you."

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Reply
#2

Hi Jerry. I am running RC 1 and loving it. I am getting the below error message trying to update it. Do I have to totally reinstall to get RC 2?

Get:5 https://repo.linuxliteos.com/linuxlite hematite InRelease [1,793 B]
Err:5 https://repo.linuxliteos.com/linuxlite hematite InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY B26492090E1E9344
Warning: OpenPGP signature verification failed: https://repo.linuxliteos.com/linuxlite hematite InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY B26492090E1E9344
Error: The repository 'http://repo.linuxliteos.com/linuxlite hematite InRelease' is not signed.
Notice: Updating from such a repository can't be done securely, and is therefore disabled by default.
Notice: See apt-secure(8) manpage for repository creation and user configuration details.
Reply
#3

RC versions are a proving ground and not meant for long term use. As Jerry posted in the 8.0 RC1 thread
Quote:RC1 has become quite redundant. Updates won't work and a few other things so testing RC1 is not necessary as of today

If you'd like to test 8.0 RC2 you will need to re-install.

stevef
clueless
Reply
#4

(05-10-2026, 05:17 PM)stevef Wrote:  RC versions are a proving ground and not meant for long term use. As Jerry posted in the 8.0 RC1 thread
Quote:RC1 has become quite redundant. Updates won't work and a few other things so testing RC1 is not necessary as of today

If you'd like to test 8.0 RC2 you will need to re-install.

D'oh!  Thanks stevef.  I just installed RC1.
Reply
#5

Successful install (RC2) with recommended partition settings. Erase Disk option was a no go. Could be me...will reattempt tomorrow and hit the OEM install as well.
This particular system is a N150 mini pc and very snappy moving around menus and opening programs. Thanks again for all you guys do!
Reply
#6

(05-10-2026, 10:44 PM)jjsmithwuzhere Wrote:  Successful install (RC2) with recommended partition settings. Erase Disk option was a no go.  Could be me...will reattempt tomorrow and hit the OEM install as well.
This particular system is a N150 mini pc and very snappy moving around menus and opening programs.  Thanks again for all you guys do!

Great to hear it's snappy on an N150, that's saying something :) !
FYI - Erase Disk otion, this was tested repeatedly on bare metal and worked everytime for RC2. Please paste the installer log from here:

Code:
/root/.cache/calamares/session.log

BEFORE you reboot or shutdown the computer at next install attempt error.

Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

"Do not correct a fool, or he will hate you; correct a wise man and he will appreciate you."

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Reply
#7

@SleepyD would like to see what you think of RC2.

Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

"Do not correct a fool, or he will hate you; correct a wise man and he will appreciate you."

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Reply
#8

Downloaded and checked RC2.  Used mintstick to make a USB drive.

Installed on low end W7 notebook selecting the 'erase' option which is called replace I think.

Install failed with similar error as early RC1.

[Image: uNXaQW2yOb24.png]

Calamares session log below, hope it helps

Code:
=== START CALAMARES 3.3.14
2026-05-11 - 18:17:04 [6]: void CalamaresApplication::init()
2026-05-11 - 18:17:04 [6]:     Calamares version: 3.3.14
2026-05-11 - 18:17:04 [6]:     .. Using Qt version: 6.10.2
2026-05-11 - 18:17:04 [6]:     .. Build type: None
2026-05-11 - 18:17:04 [6]:     .. Using Boost Python
2026-05-11 - 18:17:04 [6]:     .. Using settings: "/etc/calamares/settings.conf"
2026-05-11 - 18:17:04 [6]:     .. Using log file: "/root/.cache/calamares/session.log"
2026-05-11 - 18:17:04 [6]:     .. Languages: QList("ar", "as", "ast", "az", "az_AZ", "be", "bg", "bn", "ca", "ca@valencia", "cs_CZ", "da", "de", "el", "en", "en_GB", "eo", "es", "es_AR", "es_MX", "et", "eu", "fa", "fi_FI", "fr", "fur", "gl", "he", "hi", "hr", "hu", "id", "is", "it_IT", "ja", "ka", "ko", "lt", "ml", "mr", "nb", "nl", "oc", "pl", "pt_BR", "pt_PT", "ro", "ru", "si", "sk", "sl", "sq", "sr", "sr@latin", "sv", "tg", "th", "tr_TR", "uk", "vi", "zh_CN", "zh_TW")
2026-05-11 - 18:17:04 [6]: bool Calamares::initQmlModulesDir()
2026-05-11 - 18:17:04 [6]:     Using Calamares QML directory "/usr/share/calamares/qml"
2026-05-11 - 18:17:04 [6]: Calamares::Branding::Branding(const QString&, QObject*, qreal)
2026-05-11 - 18:17:04 [6]:     Using Calamares branding file at "/etc/calamares/branding/linuxlite/branding.desc"
2026-05-11 - 18:17:04 [6]: Calamares::Branding::Branding(const QString&, QObject*, qreal)
2026-05-11 - 18:17:04 [6]:     Loaded branding component "linuxlite"
2026-05-11 - 18:17:04 [6]:     .. Loaded QRC translation "tz_" "en_US"
2026-05-11 - 18:17:04 [6]:     .. Loaded QRC translation "calamares_" "en_US"
2026-05-11 - 18:17:04 [6]:     .. STARTUP: initSettings, initQmlPath, initBranding done
2026-05-11 - 18:17:04 [6]:     .. STARTUP: initModuleManager: module init started
2026-05-11 - 18:17:05 [6]: void Calamares::ModuleManager::doInit()
2026-05-11 - 18:17:05 [6]:     Found 60 modules
2026-05-11 - 18:17:05 [6]: void CalamaresApplication::initView()
2026-05-11 - 18:17:05 [6]:     STARTUP: initModuleManager: all modules init done
2026-05-11 - 18:17:05 [6]: void CalamaresApplication::initView()
2026-05-11 - 18:17:05 [6]:     STARTUP: initJobQueue done
2026-05-11 - 18:17:05 [6]: CalamaresWindow::CalamaresWindow(QWidget*)
2026-05-11 - 18:17:05 [6]:     Available desktop QSize(1024, 569) minimum size QSize(1024, 520)
2026-05-11 - 18:17:05 [6]:     .. Proposed window size: 1024 569
2026-05-11 - 18:17:06 [6]: void CalamaresApplication::initView()
2026-05-11 - 18:17:06 [6]:     STARTUP: CalamaresWindow created; loadModules started
2026-05-11 - 18:17:06 [6]: void Config::initLanguages()
2026-05-11 - 18:17:06 [6]:     Trying to match locale "en_US"
2026-05-11 - 18:17:06 [6]: void Config::initLanguages()
2026-05-11 - 18:17:06 [6]:     Trying to match locale QLocale::system()/* English, Latin, United States */
2026-05-11 - 18:17:06 [6]: void Config::setLocaleIndex(int)
2026-05-11 - 18:17:06 [6]:     Index 14 Selected locale "en"
2026-05-11 - 18:17:06 [6]:     .. Loading "calamares-linuxlite_en" from "/etc/calamares/branding/linuxlite/lang"
2026-05-11 - 18:17:06 [6]:     .. Branding using locale: "en"
2026-05-11 - 18:17:06 [6]:     .. Loaded QRC translation "tz_" "en"
2026-05-11 - 18:17:06 [6]:     .. Loaded QRC translation "calamares_" "en"
2026-05-11 - 18:17:10 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:10 [6]:     ViewModule "welcome@welcome" loading complete.
2026-05-11 - 18:17:10 [2]: void Calamares::Module::loadConfigurationFile(const QString&)
2026-05-11 - 18:17:10 [2]:     WARNING: No config file for "locale" found anywhere at
     "/etc/calamares/modules/locale.conf"
     "/usr/share/calamares/modules/locale.conf"
2026-05-11 - 18:17:12 [6]: QStringList loadLocales(const QString&)
2026-05-11 - 18:17:12 [6]:     Loading locales from "/usr/share/i18n/SUPPORTED"
2026-05-11 - 18:17:12 [6]: QStringList loadLocales(const QString&)
2026-05-11 - 18:17:12 [6]:     Read 514 lines
2026-05-11 - 18:17:12 [6]: QStringList loadLocales(const QString&)
2026-05-11 - 18:17:12 [6]:     After filtering 331 lines
2026-05-11 - 18:17:12 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:12 [6]:     ViewModule "locale@locale" loading complete.
2026-05-11 - 18:17:12 [2]: void Calamares::Module::loadConfigurationFile(const QString&)
2026-05-11 - 18:17:12 [2]:     WARNING: No config file for "keyboard" found anywhere at
     "/etc/calamares/modules/keyboard.conf"
     "/usr/share/calamares/modules/keyboard.conf"
2026-05-11 - 18:17:12 [6]: KeyboardModelsModel::KeyboardModelsModel(QObject*)
2026-05-11 - 18:17:12 [6]:     Loaded 183 keyboard models
2026-05-11 - 18:17:12 [6]: KeyboardGroupsSwitchersModel::KeyboardGroupsSwitchersModel(QObject*)
2026-05-11 - 18:17:12 [6]:     Loaded 45 keyboard groups
2026-05-11 - 18:17:12 [6]: KeyboardPage::KeyboardPage(Config*, QWidget*)
2026-05-11 - 18:17:12 [6]:     Variants now total= 0 selected= -1
2026-05-11 - 18:17:12 [6]: KeyboardPage::KeyboardPage(Config*, QWidget*)
2026-05-11 - 18:17:12 [6]:     Groups now total= 45 selected= -1
2026-05-11 - 18:17:12 [6]:     .. Loaded QRC translation "kb_" "en"
2026-05-11 - 18:17:12 [6]: void Config::getCurrentKeyboardLayoutXkb(QString&, QString&, QString&)
2026-05-11 - 18:17:12 [6]:     QList("pc", "us", "inet(evdev)\"")
2026-05-11 - 18:17:21 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:21 [6]:     ViewModule "keyboard@keyboard" loading complete.
2026-05-11 - 18:17:42 [6]: Calamares::Partition::InternalManager::InternalManager()
2026-05-11 - 18:17:42 [6]:     KPMCore backend starting ..
2026-05-11 - 18:17:42 [6]: DEBUG (Qt): Loaded backend plugin:  "pmsfdiskbackendplugin"
2026-05-11 - 18:17:42 [6]:     .. Backend @0x58f75aa2d9e0 "pmsfdiskbackendplugin" "1"
2026-05-11 - 18:17:42 [2]: void Config::fillConfigurationFSTypes(const QVariantMap&)
2026-05-11 - 18:17:42 [2]:     WARNING: Partition-module setting *luksGeneration* not found or invalid. Defaulting to luks1.
2026-05-11 - 18:17:42 [2]: virtual void PartitionViewStep::setConfigurationMap(const QVariantMap&)
2026-05-11 - 18:17:42 [2]:     WARNING: Partition-module setting *defaultPartitionTableType* is unset, will use gpt for efi or msdos for bios
2026-05-11 - 18:17:42 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:42 [6]:     ViewModule "partition@partition" loading complete.
2026-05-11 - 18:17:43 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:43 [6]:     ViewModule "users@users" loading complete.
2026-05-11 - 18:17:43 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:43 [6]:     ViewModule "summary@summary" loading complete.
2026-05-11 - 18:17:43 [6]: void Calamares::ModuleManager::loadModules()
2026-05-11 - 18:17:43 [6]:     Module "partition@partition" already loaded.
2026-05-11 - 18:17:43 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
2026-05-11 - 18:17:43 [6]:     QML import paths:
     "/usr/share/calamares/qml"
     "/usr/bin"
     "qrc:/qt-project.org/imports"
     "qrc:/qt/qml"
     "/usr/lib/x86_64-linux-gnu/qt6/qml"
2026-05-11 - 18:17:43 [6]: Calamares::SlideshowQML::SlideshowQML(QWidget*)
2026-05-11 - 18:17:43 [6]:     QML load on startup, API 2.
2026-05-11 - 18:17:49 [2]: void Calamares::Module::loadConfigurationFile(const QString&)
2026-05-11 - 18:17:49 [2]:     WARNING: No config file for "fstab" found anywhere at
     "/etc/calamares/modules/fstab.conf"
     "/usr/share/calamares/modules/fstab.conf"
2026-05-11 - 18:17:49 [6]: void Calamares::ModuleManager::loadModules()
2026-05-11 - 18:17:49 [6]:     Module "locale@locale" already loaded.
2026-05-11 - 18:17:49 [6]: void Calamares::ModuleManager::loadModules()
2026-05-11 - 18:17:49 [6]:     Module "keyboard@keyboard" already loaded.
2026-05-11 - 18:17:49 [6]: void Calamares::ModuleManager::loadModules()
2026-05-11 - 18:17:49 [6]:     Module "users@users" already loaded.
2026-05-11 - 18:17:49 [6]: virtual void Calamares::CppJobModule::loadSelf()
2026-05-11 - 18:17:49 [6]:     CppJobModule "shellprocess@shellprocess" loading complete.
2026-05-11 - 18:17:49 [2]: void Calamares::Module::loadConfigurationFile(const QString&)
2026-05-11 - 18:17:49 [2]:     WARNING: No config file for "umount" found anywhere at
     "/etc/calamares/modules/umount.conf"
     "/usr/share/calamares/modules/umount.conf"
2026-05-11 - 18:17:49 [6]: virtual void Calamares::CppJobModule::loadSelf()
2026-05-11 - 18:17:49 [6]:     CppJobModule "umount@umount" loading complete.
2026-05-11 - 18:17:50 [2]: void Config::setConfigurationMap(const QVariantMap&)
2026-05-11 - 18:17:50 [2]:     WARNING: Configuring the finished module with deprecated restartNowEnabled settings
2026-05-11 - 18:17:50 [6]: virtual void Calamares::ViewModule::loadSelf()
2026-05-11 - 18:17:50 [6]:     ViewModule "finished@finished" loading complete.
2026-05-11 - 18:17:50 [6]: void applyXkb(const BasicLayoutInfo&, AdditionalLayoutInfo&)
2026-05-11 - 18:17:50 [6]:     xkbmap selection changed to:  "us" - ""
2026-05-11 - 18:17:50 [6]: void CalamaresApplication::initViewSteps()
2026-05-11 - 18:17:50 [6]:     STARTUP: loadModules for all modules done
2026-05-11 - 18:17:50 [6]: void Calamares::ModuleManager::checkRequirements()
2026-05-11 - 18:17:50 [6]:     Checking module requirements ..
2026-05-11 - 18:17:51 [6]: void CalamaresApplication::initViewSteps()
2026-05-11 - 18:17:51 [6]:     STARTUP: Window now visible and ProgressTreeView populated
2026-05-11 - 18:17:51 [6]:     .. 8 view steps loaded.
2026-05-11 - 18:17:51 [6]:     .. Loaded QRC translation "kb_" "en"
2026-05-11 - 18:17:51 [6]: void Calamares::SlideshowQML::loadQmlV2Complete()
2026-05-11 - 18:17:51 [6]:     QML component complete, API 2
2026-05-11 - 18:17:52 [6]: DEBUG (Qt): smartctl initialization failed for  "/dev/sda" :  No such file or directory
2026-05-11 - 18:17:52 [6]: DEBUG (Qt): error during smart output parsing for  "/dev/sda" :  No such file or directory
2026-05-11 - 18:17:53 [2]: WARNING (Qt): unknown file system type  "dos"  on  "/dev/sda"
2026-05-11 - 18:17:53 [6]: DEBUG (Qt): smartctl initialization failed for  "/dev/sdb" :  No such file or directory
2026-05-11 - 18:17:53 [6]: DEBUG (Qt): error during smart output parsing for  "/dev/sdb" :  No such file or directory
2026-05-11 - 18:17:53 [6]:     .. Loading "/etc/calamares/branding/linuxlite/slideshow.qml"
2026-05-11 - 18:17:53 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:17:53 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:17:54 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:17:54 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:17:55 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:17:55 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:17:56 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:17:56 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:17:57 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:17:57 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:17:57 [6]: DEBUG (Qt): smartctl initialization failed for  "/dev/zram0" :  No such file or directory
2026-05-11 - 18:17:57 [6]: DEBUG (Qt): error during smart output parsing for  "/dev/zram0" :  No such file or directory
2026-05-11 - 18:17:57 [2]: WARNING (Qt): unknown file system type  ""  on  "/dev/zram0"
2026-05-11 - 18:17:58 [6]: QList<Device*> PartUtils::getDevices(DeviceType)
2026-05-11 - 18:17:58 [6]:     Removing unsuitable devices: 3 candidates.
2026-05-11 - 18:17:58 [6]:     .. Running QList("blkid", "/dev/sda")
2026-05-11 - 18:17:58 [6]:     .. Running QList("blkid", "/dev/sda1")
2026-05-11 - 18:17:58 [6]:     .. Running QList("blkid", "/dev/sda2")
2026-05-11 - 18:17:58 [6]:     .. Running QList("blkid", "/dev/sdb")
2026-05-11 - 18:17:58 [6]:     .. Removing device with iso9660 filesystem (probably a CD) on it "/dev/sdb"
2026-05-11 - 18:17:58 [6]:     .. Removing zram "/dev/zram0"
2026-05-11 - 18:17:58 [6]:     .. there are 1 devices left.
2026-05-11 - 18:17:58 [6]: void PartitionCoreModule::doInit()
2026-05-11 - 18:17:58 [6]:     LIST OF DETECTED DEVICES:
2026-05-11 - 18:17:58 [6]:     .. node capacity name prettyName
2026-05-11 - 18:17:58 [6]:     .. "/dev/sda" 250059350016 DevName$e6a599dd DevNamePretty$79891fb9
2026-05-11 - 18:17:58 [6]:     .. 1 devices detected.
2026-05-11 - 18:17:58 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:17:58 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:00 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:00 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:01 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:01 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:02 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:02 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:03 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:03 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:04 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:04 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:06 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:06 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:07 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:07 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:08 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:08 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:09 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:09 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:10 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:10 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:12 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:12 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:13 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:13 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:14 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:14 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:15 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:15 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:16 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:16 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:18 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:18 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:19 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:19 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:20 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:20 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:21 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:21 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:22 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:22 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:24 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:24 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:25 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:25 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:26 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:26 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:27 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:27 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:28 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:28 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:30 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:30 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:31 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:31 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:32 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:32 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:33 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:33 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:34 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:34 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:36 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:36 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:37 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:37 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:38 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:38 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:39 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:39 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:40 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:40 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:42 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:42 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:43 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:43 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:44 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:44 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:45 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:45 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:46 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:46 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:48 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:48 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:49 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:49 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:50 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:50 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:51 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:51 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:52 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:52 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:54 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:54 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:55 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:55 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:56 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:56 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:57 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:57 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:18:58 [1]: OsproberEntryList PartUtils::runOsprober(DeviceModel*)
2026-05-11 - 18:18:58 [1]:     ERROR: os-prober timed out.
2026-05-11 - 18:18:58 [6]: OsproberEntryList PartUtils::runOsprober(DeviceModel*)
2026-05-11 - 18:18:58 [6]:     os-prober gave no output.
2026-05-11 - 18:18:58 [2]: WARNING (Qt): QProcess: Destroyed while process ("os-prober") is still running.
2026-05-11 - 18:18:58 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 18:18:58 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 18:18:58 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:18:58 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:00 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:00 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:01 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:01 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:02 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:02 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:03 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:03 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:04 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:04 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:06 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:06 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:07 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:07 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:08 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:08 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:09 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:09 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:10 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:10 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:12 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:12 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:13 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:13 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:14 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:14 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:15 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:15 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:16 [6]: void Calamares::RequirementsChecker::reportProgress()
2026-05-11 - 18:19:16 [6]:     Remaining modules: 7
     "partition"
     "shellprocess"
     "summary"
     "umount"
     "unpackfs"
     "users"
     "welcome"
2026-05-11 - 18:19:17 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
2026-05-11 - 18:19:17 [6]:     Got 1 requirement results from "partition"
2026-05-11 - 18:19:17 [2]: void ChoicePage::updateActionDescriptionsTr()
2026-05-11 - 18:19:17 [2]:     WARNING: Invalid osprober count, labels and buttons not updated.
2026-05-11 - 18:19:17 [6]: void ChoicePage::updateDeviceStatePreview()
2026-05-11 - 18:19:17 [6]:     Updating partitioning state widgets.
2026-05-11 - 18:19:17 [6]: void ChoicePage::setupActions()
2026-05-11 - 18:19:17 [6]:     Setting up actions for "/dev/sda" with 0 entries.
2026-05-11 - 18:19:17 [6]: bool PartUtils::canBeResized(Partition*, const Logger::Once&)
2026-05-11 - 18:19:17 [6]:     Partition "/dev/sda1" authorized for resize + autopartition install.
2026-05-11 - 18:19:17 [6]:     .. contains resizable "/dev/sda1"
2026-05-11 - 18:19:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 18:19:17 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 18:19:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 18:19:17 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 18:19:17 [6]:     .. contains replaceable "/dev/sda1"
2026-05-11 - 18:19:17 [6]: bool PartUtils::canBeResized(Partition*, const Logger::Once&)
2026-05-11 - 18:19:17 [6]:     Can not resize "/dev/sda2" , partition is mounted
2026-05-11 - 18:19:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 18:19:17 [6]:     Checking if "/dev/sda2" can be replaced.
2026-05-11 - 18:19:17 [6]:     .. NO, it is mounted.
2026-05-11 - 18:19:17 [6]: void ChoicePage::updateActionDescriptionsTr()
2026-05-11 - 18:19:17 [6]:     Setting texts for 0 osprober entries
2026-05-11 - 18:19:17 [6]: void ChoicePage::setupActions()
2026-05-11 - 18:19:17 [6]:     No partitions ( any-mounted? true is-raid? false ) for erase-action.
2026-05-11 - 18:19:17 [6]: void ChoicePage::continueApplyDeviceChoice()
2026-05-11 - 18:19:17 [6]:     Previous device -1 new device 0
2026-05-11 - 18:19:17 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 18:19:17 [6]:     InstallChoice Config::Erase "erase"
2026-05-11 - 18:19:17 [6]: PartitionTable* CreatePartitionTableJob::createTable()
2026-05-11 - 18:19:17 [6]:     CreatePartitionTableJob::createTable trying to make table for device "/dev/sda"
2026-05-11 - 18:19:17 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 18:19:17 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 18:19:17 [6]: bool GeneralRequirements::checkHasPower()
2026-05-11 - 18:19:17 [6]:     A battery exists, checking for mains power.
2026-05-11 - 18:19:17 [6]: Calamares::RequirementsList GeneralRequirements::checkRequirements()
2026-05-11 - 18:19:17 [6]:     GeneralRequirements output:
     storage :   12884901888
     enoughStorage :   true
     RAM :   2147483648
     enoughRam :   true
     hasPower :   true
     hasInternet :   unchecked
     isRoot :   true
2026-05-11 - 18:19:17 [6]: void Calamares::RequirementsChecker::addCheckedRequirements(Calamares::Module*)
2026-05-11 - 18:19:17 [6]:     Got 5 requirement results from "welcome"
2026-05-11 - 18:19:17 [6]: void Calamares::RequirementsChecker::finished()
2026-05-11 - 18:19:17 [6]:     All requirements have been checked.
2026-05-11 - 18:19:17 [6]: void Calamares::RequirementsModel::describe() const
2026-05-11 - 18:19:17 [6]:     Requirements model has 6 items
2026-05-11 - 18:19:17 [6]:     .. requirement 0 "partitions" satisfied? true mandatory? true
2026-05-11 - 18:19:17 [6]:     .. requirement 1 "storage" satisfied? true mandatory? true
2026-05-11 - 18:19:17 [6]:     .. requirement 2 "ram" satisfied? true mandatory? true
2026-05-11 - 18:19:17 [6]:     .. requirement 3 "power" satisfied? true mandatory? false
2026-05-11 - 18:19:17 [6]:     .. requirement 4 "root" satisfied? true mandatory? true
2026-05-11 - 18:19:17 [6]:     .. requirement 5 "screen" satisfied? true mandatory? false
2026-05-11 - 18:19:28 [6]: void Config::setLocaleIndex(int)
2026-05-11 - 18:19:28 [6]:     Index 15 Selected locale "en_GB"
2026-05-11 - 18:19:28 [6]:     .. Loading "calamares-linuxlite_en_GB" from "/etc/calamares/branding/linuxlite/lang"
2026-05-11 - 18:19:28 [6]:     .. Branding using locale: "en_GB"
2026-05-11 - 18:19:28 [6]:     .. Loaded QRC translation "tz_" "en_GB"
2026-05-11 - 18:19:28 [6]:     .. Loaded QRC translation "calamares_" "en_GB"
2026-05-11 - 18:19:28 [6]:     .. Loaded QRC translation "kb_" "en_GB"
2026-05-11 - 18:19:28 [6]: void ChoicePage::updateActionDescriptionsTr()
2026-05-11 - 18:19:28 [6]:     Setting texts for 0 osprober entries
2026-05-11 - 18:19:39 [6]: quint64 swapSuggestion(quint64, Config::SwapChoice)
2026-05-11 - 18:19:39 [6]:     Suggested swap size: 7 GiB
2026-05-11 - 18:19:39 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 18:19:39 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 18:19:50 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
2026-05-11 - 18:19:50 [6]:     Mapping "en_GB" in "US" to locale.
2026-05-11 - 18:19:50 [6]:     .. Got best match for "en_GB" as "en_GB.UTF-8"
2026-05-11 - 02:19:55 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
2026-05-11 - 02:19:55 [6]:     Mapping "en_GB" in "US" to locale.
2026-05-11 - 02:19:55 [6]:     .. Got best match for "en_GB" as "en_GB.UTF-8"
2026-05-11 - 02:19:55 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
2026-05-11 - 02:19:55 [6]:     Mapping "en_GB" in "US" to locale.
2026-05-11 - 02:19:55 [6]:     .. Got best match for "en_GB" as "en_GB.UTF-8"
2026-05-11 - 02:19:59 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 02:19:59 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 02:20:00 [6]: static LocaleConfiguration LocaleConfiguration::fromLanguageAndLocation(const QString&, const QStringList&, const QString&)
2026-05-11 - 02:20:00 [6]:     Mapping "en_GB" in "GB" to locale.
2026-05-11 - 02:20:01 [6]:     .. Got best match for "en_GB" as "en_GB.UTF-8"
2026-05-11 - 07:20:18 [6]: void PartitionCoreModule::dumpQueue() const
2026-05-11 - 07:20:18 [6]:     # Queue:
2026-05-11 - 07:20:18 [6]:     .. ## Device: "/dev/sda"
2026-05-11 - 07:20:18 [6]:     .. - CreatePartitionTableJob
2026-05-11 - 07:20:18 [6]:     .. - CreatePartitionJob
2026-05-11 - 07:20:18 [6]:     .. - SetPartFlagsJob
2026-05-11 - 07:20:18 [6]:     .. - CreatePartitionJob
2026-05-11 - 07:20:18 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:20:18 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:20:20 [6]: void Config::guessLocaleKeyboardLayout()
2026-05-11 - 07:20:20 [6]:     Got locale language "en_GB.UTF-8"
2026-05-11 - 07:20:20 [6]:     .. looking for locale part "GB"
2026-05-11 - 07:20:20 [6]:     .. matched "gb"
2026-05-11 - 07:20:24 [6]: void guessLayout(const QStringList&, KeyboardLayoutModel*, KeyboardVariantsModel*)
2026-05-11 - 07:20:24 [6]:     Next level: "en"
2026-05-11 - 07:20:24 [6]: void applyXkb(const BasicLayoutInfo&, AdditionalLayoutInfo&)
2026-05-11 - 07:20:24 [6]:     xkbmap selection changed to:  "gb" - ""
2026-05-11 - 07:20:59 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:20:59 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:20:59 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:20:59 [6]:     InstallChoice Config::Replace "replace"
2026-05-11 - 07:20:59 [6]: DEBUG (Qt): smartctl initialization failed for  "/dev/sda" :  No such file or directory
2026-05-11 - 07:20:59 [6]: DEBUG (Qt): error during smart output parsing for  "/dev/sda" :  No such file or directory
2026-05-11 - 07:20:59 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:20:59 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:20:59 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:20:59 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:20:59 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:20:59 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:20:59 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:20:59 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:00 [2]: WARNING (Qt): unknown file system type  "dos"  on  "/dev/sda"
2026-05-11 - 07:21:00 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 07:21:00 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 07:21:00 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
2026-05-11 - 07:21:00 [6]:     No path to restore, choosing default
2026-05-11 - 07:21:00 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
2026-05-11 - 07:21:00 [6]:     No path to restore, choosing default
2026-05-11 - 07:21:00 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 07:21:00 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 07:21:00 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
2026-05-11 - 07:21:00 [6]:     No path to restore, choosing default
2026-05-11 - 07:21:00 [6]: void Calamares::restoreSelectedBootLoader(QComboBox&, const QString&)
2026-05-11 - 07:21:00 [6]:     No path to restore, choosing default
2026-05-11 - 07:21:00 [6]: void PartitionCoreModule::setBootLoaderInstallPath(const QString&)
2026-05-11 - 07:21:00 [6]:     PCM::setBootLoaderInstallPath "/dev/sda"
2026-05-11 - 07:21:00 [6]: void PartitionCoreModule::setBootLoaderInstallPath(const QString&)
2026-05-11 - 07:21:00 [6]:     PCM::setBootLoaderInstallPath "/dev/sda"
2026-05-11 - 07:21:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:17 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:21:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:17 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:21:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:17 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:21:17 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:17 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:21:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:19 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:21:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:19 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:21:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:19 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:21:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:21:19 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:21:53 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:53 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:53 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:21:53 [6]:     InstallChoice Config::Alongside "alongside"
2026-05-11 - 07:21:53 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:53 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:53 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:21:53 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:21:53 [6]: void PartitionSplitterWidget::setupItems(QVector<PartitionSplitterItem>&)
2026-05-11 - 07:21:53 [6]:     PSI added item "/dev/sda1" size 241662259712
2026-05-11 - 07:21:53 [6]: void PartitionSplitterWidget::setupItems(QVector<PartitionSplitterItem>&)
2026-05-11 - 07:21:53 [6]:     PSI added item "/dev/sda2" size 8396041728
2026-05-11 - 07:21:53 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:53 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:53 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:53 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:58 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:58 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:58 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:21:58 [6]:     InstallChoice Config::Replace "replace"
2026-05-11 - 07:21:58 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:58 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:58 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:21:58 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:21:58 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:58 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:21:58 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:21:58 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:04 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:22:04 [6]:     InstallChoice Config::Manual "manual"
2026-05-11 - 07:22:04 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:22:04 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:22:08 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:08 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:08 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:22:08 [6]:     InstallChoice Config::Replace "replace"
2026-05-11 - 07:22:08 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:08 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:08 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:22:08 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:22:08 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:08 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:08 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:08 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:10 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:22:10 [6]:     InstallChoice Config::Manual "manual"
2026-05-11 - 07:22:10 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:22:10 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:22:12 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:12 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:12 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:22:12 [6]:     InstallChoice Config::Replace "replace"
2026-05-11 - 07:22:12 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:12 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:12 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:22:12 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:22:12 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:12 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:12 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:12 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:40 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:40 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:40 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:22:40 [6]:     InstallChoice Config::Alongside "alongside"
2026-05-11 - 07:22:40 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:40 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:40 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:22:40 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:22:40 [6]: void PartitionSplitterWidget::setupItems(QVector<PartitionSplitterItem>&)
2026-05-11 - 07:22:40 [6]:     PSI added item "/dev/sda1" size 241662259712
2026-05-11 - 07:22:40 [6]: void PartitionSplitterWidget::setupItems(QVector<PartitionSplitterItem>&)
2026-05-11 - 07:22:40 [6]:     PSI added item "/dev/sda2" size 8396041728
2026-05-11 - 07:22:40 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:40 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:40 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:40 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:48 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:48 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:48 [6]: void ChoicePage::applyActionChoice(InstallChoice)
2026-05-11 - 07:22:48 [6]:     InstallChoice Config::Replace "replace"
2026-05-11 - 07:22:48 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:48 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:48 [6]: void ChoicePage::updateActionChoicePreview(InstallChoice)
2026-05-11 - 07:22:48 [6]:     Updating partitioning preview widgets.
2026-05-11 - 07:22:48 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:48 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:48 [6]: bool ChoicePage::calculateNextEnabled() const
2026-05-11 - 07:22:48 [6]:     No partition selected for alongside or replace
2026-05-11 - 07:22:49 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:49 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:49 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:49 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:49 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:49 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:49 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:49 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:50 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:50 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:50 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:50 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:50 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:50 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:50 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:50 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:53 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:53 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:53 [6]:     Checking if "/dev/sda2" can be replaced.
2026-05-11 - 07:22:53 [6]:     .. NO, it is mounted.
2026-05-11 - 07:22:53 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:53 [6]:     Checking if "/dev/sda2" can be replaced.
2026-05-11 - 07:22:53 [6]:     .. NO, it is mounted.
2026-05-11 - 07:22:54 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:54 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:54 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:54 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:54 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:54 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:54 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:54 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:55 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:55 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:55 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:55 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:55 [6]: void PartitionActions::doReplacePartition(PartitionCoreModule*, Device*, Partition*, Choices::ReplacePartitionOptions)
2026-05-11 - 07:22:55 [6]:     doReplacePartition for device "/dev/sda1"
2026-05-11 - 07:22:55 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 07:22:55 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 07:22:55 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:55 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:22:55 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:22:55 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:22:55 [6]: void PartitionCoreModule::setBootLoaderInstallPath(const QString&)
2026-05-11 - 07:22:55 [6]:     PCM::setBootLoaderInstallPath "/dev/sda"
2026-05-11 - 07:22:59 [2]: WARNING (Qt): beginResetModel called on BootLoaderModel(0x58f75aa28260) without calling endResetModel first
2026-05-11 - 07:22:59 [2]: WARNING (Qt): endResetModel called on BootLoaderModel(0x58f75aa28260) without calling beginResetModel first
2026-05-11 - 07:22:59 [6]: void PartitionCoreModule::setBootLoaderInstallPath(const QString&)
2026-05-11 - 07:22:59 [6]:     PCM::setBootLoaderInstallPath "/dev/sda"
2026-05-11 - 07:22:59 [6]: void PartitionCoreModule::dumpQueue() const
2026-05-11 - 07:22:59 [6]:     # Queue:
2026-05-11 - 07:22:59 [6]:     .. ## Device: "/dev/sda"
2026-05-11 - 07:22:59 [6]:     .. - DeletePartitionJob
2026-05-11 - 07:22:59 [6]:     .. - CreatePartitionJob
2026-05-11 - 07:22:59 [6]:     .. - SetPartFlagsJob
2026-05-11 - 07:23:04 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:04 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:04 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:04 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:04 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:04 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:04 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:04 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:05 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:05 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:05 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:05 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:05 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:07 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:07 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:07 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:07 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:07 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:07 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:07 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:07 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:19 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:19 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:19 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:19 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:19 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:19 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:19 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:21 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:21 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:21 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:21 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:24 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:24 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:24 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:24 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:24 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:24 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:24 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:26 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:26 [6]:     Checking if "/dev/sda1" can be replaced.
2026-05-11 - 07:23:26 [6]: bool PartUtils::canBeReplaced(Partition*, const Logger::Once&)
2026-05-11 - 07:23:26 [6]:     Partition "/dev/sda1" authorized for replace install.
2026-05-11 - 07:23:37 [6]: void PartitionCoreModule::setBootLoaderInstallPath(const QString&)
2026-05-11 - 07:23:37 [6]:     PCM::setBootLoaderInstallPath "/dev/sda"
2026-05-11 - 07:25:17 [2]: WARNING (Qt): QObject::setParent: Cannot set parent, new parent is in a different thread
2026-05-11 - 07:25:17 [6]: virtual QString PartitionViewStep::prettyStatus() const
2026-05-11 - 07:25:17 [6]:     Summary for Partition 1 Config::Replace
2026-05-11 - 07:25:17 [6]: QStringList findEssentialLVs(const QList<PartitionCoreModule::DeviceInfo*>&)
2026-05-11 - 07:25:17 [6]:     Checking LVM use on 1 devices
2026-05-11 - 07:25:17 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
2026-05-11 - 07:25:17 [6]:     Building partition information map
2026-05-11 - 07:25:17 [6]:     .. partitions on "/dev/sda"
2026-05-11 - 07:25:17 [6]:     ..  mapping for "" "New Partition"
     partlabel :   "rootfs"
     partition-uuid (partuuid) :   "PartUUID$54006144"
     parttype :   ""
     partattrs :   "0"
     mountPoint: :   "/"
     fs: :   "ext4"
     fsName :   "ext4"
     filesystem-uuid (uuid) :   "FSUUID$1c27b586"
     claimed :   "true"
2026-05-11 - 07:25:17 [6]:     ..  mapping for "/dev/sda2" "/dev/sda2"
     partlabel :   ""
     partition-uuid (partuuid) :   "PartUUID$54006144"
     parttype :   ""
     partattrs :   "0"
     mountPoint: :   ""
     fs: :   "linuxswap"
     fsName :   "linuxswap"
     filesystem-uuid (uuid) :   "FSUUID$f66e9911"
     claimed :   "false"
2026-05-11 - 07:25:17 [2]: WARNING (Qt): QLayout: Attempting to add QLayout "" to QWidget "", which already has a layout
2026-05-11 - 07:25:17 [2]: WARNING (Qt): QObject::setParent: Cannot set parent, new parent is in a different thread
2026-05-11 - 07:25:17 [6]: QStringList findEssentialLVs(const QList<PartitionCoreModule::DeviceInfo*>&)
2026-05-11 - 07:25:17 [6]:     Checking LVM use on 1 devices
2026-05-11 - 07:25:17 [6]: QVariantList FillGlobalStorageJob::createPartitionList() const
2026-05-11 - 07:25:17 [6]:     Building partition information map
2026-05-11 - 07:25:17 [6]:     .. partitions on "/dev/sda"
2026-05-11 - 07:25:17 [6]:     ..  mapping for "" "New Partition"
     partlabel :   "rootfs"
     partition-uuid (partuuid) :   "PartUUID$54006144"
     parttype :   ""
     partattrs :   "0"
     mountPoint: :   "/"
     fs: :   "ext4"
     fsName :   "ext4"
     filesystem-uuid (uuid) :   "FSUUID$1c27b586"
     claimed :   "true"
2026-05-11 - 07:25:17 [6]:     ..  mapping for "/dev/sda2" "/dev/sda2"
     partlabel :   ""
     partition-uuid (partuuid) :   "PartUUID$54006144"
     parttype :   ""
     partattrs :   "0"
     mountPoint: :   ""
     fs: :   "linuxswap"
     fsName :   "linuxswap"
     filesystem-uuid (uuid) :   "FSUUID$f66e9911"
     claimed :   "false"
2026-05-11 - 07:25:17 [6]: void ensureSize(QWidget*, QScrollArea*, Calamares::ViewStep*)
2026-05-11 - 07:25:17 [6]:     Summary widget is larger than viewport, enlarge by 55 to QSize(834, 582)
2026-05-11 - 07:25:46 [6]: QStringList findEssentialLVs(const QList<PartitionCoreModule::DeviceInfo*>&)
2026-05-11 - 07:25:46 [6]:     Checking LVM use on 1 devices
2026-05-11 - 07:25:46 [6]: void Calamares::JobThread::finalize()
2026-05-11 - 07:25:46 [6]:     There are 24 jobs, total weight 23
2026-05-11 - 07:25:46 [6]:     .. Job 1 "Managing auto-mount settings…" +wt 0.125 tot.wt 0.125
2026-05-11 - 07:25:46 [6]:     .. Job 2 "Clearing all temporary mounts…" +wt 0.125 tot.wt 0.25
2026-05-11 - 07:25:46 [6]:     .. Job 3 "Clear mounts for partitioning operations on /dev/sda" +wt 0.125 tot.wt 0.375
2026-05-11 - 07:25:46 [6]:     .. Job 4 "Deleting partition /dev/sda1…" +wt 0.125 tot.wt 0.5
2026-05-11 - 07:25:46 [6]:     .. Job 5 "Create new 230467MiB partition on /dev/sda (Samsung SSD 840 EVO 250GB) with file system ext4" +wt 0.125 tot.wt 0.625
2026-05-11 - 07:25:46 [6]:     .. Job 6 "Set flags on 230467MiB ext4 partition" +wt 0.125 tot.wt 0.75
2026-05-11 - 07:25:46 [6]:     .. Job 7 "Set partition information" +wt 0.125 tot.wt 0.875
2026-05-11 - 07:25:46 [6]:     .. Job 8 "Managing auto-mount settings…" +wt 0.125 tot.wt 1
2026-05-11 - 07:25:46 [6]:     .. Job 9 "mount" +wt 1 tot.wt 2
2026-05-11 - 07:25:46 [6]:     .. Job 10 "unpackfs" +wt 12 tot.wt 14
2026-05-11 - 07:25:46 [6]:     .. Job 11 "fstab" +wt 1 tot.wt 15
2026-05-11 - 07:25:46 [6]:     .. Job 12 "Setting timezone to Europe/London…" +wt 1 tot.wt 16
2026-05-11 - 07:25:46 [6]:     .. Job 13 "localecfg" +wt 1 tot.wt 17
2026-05-11 - 07:25:46 [6]:     .. Job 14 "Setting keyboard model to pc105, layout as gb-…" +wt 1 tot.wt 18
2026-05-11 - 07:25:46 [6]:     .. Job 15 "Configuring <pre>sudo</pre> users…" +wt 0.166667 tot.wt 18.1667
2026-05-11 - 07:25:46 [6]:     .. Job 16 "Preparing groups…" +wt 0.166667 tot.wt 18.3333
2026-05-11 - 07:25:46 [6]:     .. Job 17 "Create user stephen" +wt 0.166667 tot.wt 18.5
2026-05-11 - 07:25:46 [6]:     .. Job 18 "Set password for user stephen" +wt 0.166667 tot.wt 18.6667
2026-05-11 - 07:25:46 [6]:     .. Job 19 "Set password for user root" +wt 0.166667 tot.wt 18.8333
2026-05-11 - 07:25:46 [6]:     .. Job 20 "Set hostname ao722-rc2" +wt 0.166667 tot.wt 19
2026-05-11 - 07:25:46 [6]:     .. Job 21 "displaymanager" +wt 1 tot.wt 20
2026-05-11 - 07:25:46 [6]:     .. Job 22 "bootloader" +wt 1 tot.wt 21
2026-05-11 - 07:25:46 [6]:     .. Job 23 "Running shell processes…" +wt 1 tot.wt 22
2026-05-11 - 07:25:46 [6]:     .. Job 24 "Unmounting file systems…" +wt 1 tot.wt 23
2026-05-11 - 07:25:46 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:25:46 [6]:     Starting job "Managing auto-mount settings…" ( 1 / 24 )
2026-05-11 - 07:25:46 [6]: virtual Calamares::JobResult AutoMountManagementJob::exec()
2026-05-11 - 07:25:46 [6]:     Set automount to disable
2026-05-11 - 07:25:46 [1]: void {anonymous}::PowerManagementInterface::inhibitDBusCallFinished(QDBusPendingCallWatcher*)
2026-05-11 - 07:25:46 [1]:     ERROR: Could not inhibit sleep: QDBusError("org.freedesktop.DBus.Error.ServiceUnknown", "The name org.freedesktop.PowerManagement.Inhibit was not provided by any .service files")
2026-05-11 - 07:25:47 [6]: std::shared_ptr<Calamares::Partition::AutoMountInfo> Calamares::Partition::automountDisable(bool)
2026-05-11 - 07:25:47 [6]:     Setting Solid automount to disabled
2026-05-11 - 07:25:47 [6]:     .. 2 reply QList()
2026-05-11 - 07:25:47 [6]:     .. 2 reply QList(QVariant(bool, false))
2026-05-11 - 07:25:47 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:25:47 [6]:     Starting job "Clearing all temporary mounts…" ( 2 / 24 )
2026-05-11 - 07:25:47 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:25:47 [6]:     Starting job "Clear mounts for partitioning operations on /dev/sda" ( 3 / 24 )
2026-05-11 - 07:25:51 [6]: QStringList getPartitionsForDevice(const QString&)
2026-05-11 - 07:25:51 [6]:     Reading from "/proc/partitions" looking for "sda"
2026-05-11 - 07:25:51 [6]: virtual Calamares::JobResult ClearMountsJob::exec()
2026-05-11 - 07:25:51 [6]:     ClearMountsJob finished. Here's what was done:
     "Successfully disabled swap /dev/sda2."
     "Successfully cleared swap /dev/sda2."
2026-05-11 - 07:25:51 [6]:     .. Running QList("udevadm", "settle")
2026-05-11 - 07:25:51 [6]:     .. Running QList("sync")
2026-05-11 - 07:26:01 [2]: Calamares::Utils::ProcessResult Calamares::Utils::Runner::run()
2026-05-11 - 07:26:01 [2]:     WARNING: Process "sync" timed out after 10000 ms. Output so far:

2026-05-11 - 07:26:01 [2]: WARNING (Qt): QProcess: Destroyed while process ("env") is still running.
2026-05-11 - 07:26:22 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:26:22 [6]:     Starting job "Deleting partition /dev/sda1…" ( 4 / 24 )
2026-05-11 - 07:27:06 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:27:06 [6]:     Starting job "Create new 230467MiB partition on /dev/sda (Samsung SSD 840 EVO 250GB) with file system ext4" ( 5 / 24 )
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Set flags on partition /dev/sda1"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Set partition information"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Managing auto-mount settings…"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "mount"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "unpackfs"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "fstab"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Setting timezone to Europe/London…"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "localecfg"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Setting keyboard model to pc105, layout as gb-…"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Configuring <pre>sudo</pre> users…"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Preparing groups…"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Create user stephen"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Set password for user stephen"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Set password for user root"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Set hostname ao722-rc2"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "displaymanager"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "bootloader"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Running shell processes…"
2026-05-11 - 07:28:45 [6]: virtual void Calamares::JobThread::run()
2026-05-11 - 07:28:45 [6]:     Skipping non-emergency job "Unmounting file systems…"
2026-05-11 - 07:28:45 [1]: void Calamares::ViewManager::onInstallationFailed(const QString&, const QString&)
2026-05-11 - 07:28:45 [1]:     ERROR: Installation failed: "The installer failed to create partition on disk 'Samsung SSD 840 EVO 250GB'."
2026-05-11 - 07:28:45 [6]:     .. - message: "The installer failed to create partition on disk 'Samsung SSD 840 EVO 250GB'."
2026-05-11 - 07:28:45 [6]:     .. - details:
Create a new partition (225.07 GiB, ext4) on ‘/dev/sda’


Job: Create new partition on device ‘/dev/sda’


Command: sfdisk --force --append /dev/sda


Job: Set the label on partition ‘/dev/sda1’ to "rootfs"

Partition table of partition ‘/dev/sda1’ does not support setting names. Job ignored.


Job: Create file system ‘ext4’ on partition ‘/dev/sda1’


Command: mkfs.ext4 -qF /dev/sda1


Command: sfdisk --part-type /dev/sda 1 83


Job: Set the file system label on partition ‘/dev/sda1’ to "rootfs"


Command: e2label /dev/sda1 rootfs


Job: Check file system on partition ‘/dev/sda1’


Command: e2fsck -f -y -v /dev/sda1


2026-05-11 - 07:28:45 [6]: void Calamares::ViewManager::onInstallationFailed(const QString&, const QString&)
2026-05-11 - 07:28:45 [6]:     Calamares will quit when the dialog closes.
2026-05-11 - 07:28:45 [6]: void Config::doNotify(bool, bool)
2026-05-11 - 07:28:45 [6]:     Notification not sent; completion: failed
2026-05-11 - 07:28:46 [6]: void {anonymous}::PowerManagementInterface::uninhibitSleep()
2026-05-11 - 07:28:46 [6]:     Sleep was never inhibited.

stevef
clueless
Reply
#9

Thanks @stevef, very helpful info. I will debug.

Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

"Do not correct a fool, or he will hate you; correct a wise man and he will appreciate you."

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Reply
#10

@stevef does the following scenario apply to your reported experience for that particular log and screenshot install attempt?

AI Wrote:This is the most important finding. The user reports "Erase Disk", but the log says otherwise:

  - At 18:19:17 the user initially picked Erase (InstallChoice Config::Erase "erase"), queue was CreatePartitionTableJob + CreatePartitionJob + SetPartFlagsJob + CreatePartitionJob (table wipe + 2 new partitions).
  - Then between 07:20:59 and 07:23:37 the user toggled choices repeatedly: Replace → Alongside → Replace → Manual → Replace → Manual → Replace. Final settle is Replace.
  - The queue that actually executed (line 1216–1218) is:
  Clear mounts on /dev/sda
  Delete partition /dev/sda1
  Create one 230467MiB partition
  - No CreatePartitionTableJob, swap /dev/sda2 left untouched. That's Replace, not Erase.

  So users picking "Erase Disk" but then clicking back to inspect, then forward again, may be silently changing modes.

Download your free copy of Linux Lite today.

Jerry Bezencon
Linux Lite Creator

"Do not correct a fool, or he will hate you; correct a wise man and he will appreciate you."

[Image: X5qGkCg.png]

[Image: 0op1GNe.png] [Image: LgJ2mtP.png] [Image: vLZcFUE.png] [Image: lrUHro3.jpg]
Reply


Forum Jump:


Users browsing this thread: 1 Invisible User(s), 2 Guest(s)