I have tried to get the system to run "nmcli nm wwan on" at startup so the wwan modem in the computer does not start in airplane mode all the time, but it does not matter if I put the command in ~/.profile or /etc/rc.local . wwan is still disabled.

However running nmcli nm wwan on in a terminal activates wwan, so it seems like the system disables wwan at some later stage.

Any ideas?

@Jerry/Misko
Just some friendly feedback. On LL2.2/64 I'm getting an error when attempting to install Chrome via Lite Software.

using power manager (screensaver is inactive)
AC settings
lock computer when lid is closed.
turn off = never

bug.
close lid.
open lid, should see password screen,
pw screen screen may show briefly then system goes to sleep.
have tap power button to awake system.
password screen may appear or a blank screen,
if blank screen,have to power button again to get password screen back up

laptop hp nc4400

In Linux Lite 2.4, configuring Network Share Settings is greatly simplified. All you will have to do is, Menu > System > Configure Network Shares, enter your password and follow the prompts.

This is a significant milestone for Linux Lite as this marks the end of any terminal based apps in LL.
It's been a long, rewarding road from Linux Lite 1.0



See this video for a look at how it will work:

https://mityer.khdlhfjijfrupr.tk/video/cnss.mkv

Hi,

Not sure whether the forum software is 3rd party and can't be changed/ customized...

If yes, I'd like to suggest the following improvement to the "Recent Posts" section:

* add a scrollbar so that the user can scroll down the list of recent posts to find a little bit older ones
* maybe summarize all consecutive posts of the same topic in one line with a count

reason: The section is very small and only shows the last 7 posts. Quite often I can only see one topic due to an active discussion going on that created >= 7 entries in a row. In that case other, relatively new topics drop off the list and can't be picked up on the first glance at the forum.

Thanks for your time and consideration

I have LL 2.2 on drive, Mint on sbd1 along with my data partition which was shared with LL 2.2/Mint/Windows 7 (Win 7 used to be on sbd2 as well, but I removed after I was able to get some Windows programs running on Wine).  Now booting into either LL or Mint I get this:


1) On boot it tells me it can't mount data and Skip it to continue. 
2) After boot attempting to mount manually I get: Failed to mount "Data"  Error mounting system-managed device /dev/sdb7: Command Line 'mount "/home/chris/data" exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sdb7': Operation not permitted
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option


The Windows 7 data was not linked there, that was simply a default save location.


Thoughts?  It worked so great for weeks!


Chris


I guess I should mention I tried ro mount option with the following and got a very similar error message:



chris@chris-HP:~$ udisksctl mount --block-device /dev/sdb7 --options ro
Error mounting /dev/sdb7: GDBus.Error:org.freedesktop.UDisks2.Error.Failed: Error mounting system-managed device /dev/sdb7: Command-line `mount "/home/chris/Data"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sdb7': Operation not permitted
The NTFS partition is in an unsafe state. Please resume and shutdown
Windows fully (no hibernation or fast restarting), or mount the volume
read-only with the 'ro' mount option.

Is there a Terminal command to get the system tray back to default settings in LL 2.2
A friend has really messed his up.

Jocklad

Hi all,
        I have just installed " Kdepasswd " from the  " Lite Software Centre " it seems to have installed O.K. but I cant find it anywhere on the P.C. I have used " Run Program " and nothing happens. If I type a search for it in " Synaptic Package Manager " It shows as installed !
            I am running O.S. 1.0.8 Lite.

how do i unlock the screen if it locks up during an install?
...
well, i tried hitting restart, and i guess the install finished, because it is running fine; doing updates now
.
i chose it because it looks good, it works, and it doesn't use too many resources on my older laptop; when minimized, firefox plays last.fm using only 25% of cpu, which is decent compared to some others i have tried
.
it would be good to know how to get out of the screenlocker in the install/live version
.
tyvm, good so far

  [size=1.35em]A) Was running LL2.0 32 bit -update kernel 3.15 Full install  July 2104[/size][size=1.35em]Fujitsu Siemens Amilo Si1520  + 2GB RAM on LL 2.0 + new trial Kernel. Video working fine on INTEL 945GM/GMS 943/940 GML Integrated Graphics Controller (rev03).  Display max 1280 x 800 . Single SATA HDD 250GB[/size][size=1.35em]Recently updated via menu/favourites/install updates[/size][size=1.35em]B) Managed to eventually write a Live DVD of LL2.2-32 bit.iso
[/size][size=1.35em]Original Iso md5 from terminal “[/size]8960b5c0bed2e790dec213235a883cc3 linux-lite-2.2-32bit.iso” C) Tries to run Live  DVD  but had real difficulty finding correct keyboard combination for the laptop – Continual “*” instead of “0”  So could not log onto router via wifi.D) Decided to install anyway as a full install REPLACING original LL2.0. Ticked Option 2“Erase disc and Install Linux” AND ticked option 3 LVM.  On going to "next" a Grey box came up with problem ( did not not what it said.E)So Unticked Box 3 (LVM) and tried "next" – again Grey Box came up.F) Tried Quit and Back but process hung – Had  force to switch off via on/off button.G) On rebooting boot screen  hangs  I.e blank screen with flashing cursor top left.H) Force shut off.  Bios Boot prority - usb stick - DVDROM SATA HDDI) Plug in usb stick with puppy linix liveto perhaps “rescue” - will not initiate still blank screen - flashing cursorJ) Put in live DVD Puppy linux  and full install to HDD.  Check HDD with Gparted – HDD  taken Puppy linux and sda flagged “BOOT”Take out DVD and reboot – Blank screen Flashing cursor.K) Enter BIOS on re boot up (F2) and set to default –  SATA HDD as priority.L) Still Blank Screen and flashing cursorHelp please – Now you know why I have my psuedonym –  Computers yet again “driving me tio drink”.  For me this is not a hobby – Using Computers (NOT IT) is my job =  data crunching – mining.- Fortunately this is not my main computer – that is still on LL 2.0


Thanks.