+- Linux Lite Forums (https://mityer.khdlhfjijfrupr.tk/forums)
+-- Forum: Hardware - Support (https://mityer.khdlhfjijfrupr.tk/forums/forumdisplay.php?fid=6)
+--- Forum: Sound (https://mityer.khdlhfjijfrupr.tk/forums/forumdisplay.php?fid=23)
+--- Thread: No Sound HDA nVidia STAC9227 Analog (/showthread.php?tid=3348)
No Sound HDA nVidia STAC9227 Analog - cptncc1701d - 09-24-2016
Hi Folks,
I just installed to Linux Lite 3.0 on my old Dell PC and all seems to be working except I do not hear any sound. I know that the sound card/speakers were working before the install so I don't think it is a hardware issue.
I am not a Linux expert and so my "limited" troubleshooting hasn't resolved the issue. Can someone please give me some information on how I should proceed?
I did go into Multimedia Volume Control and I see that it shows I am not muted but it does say in the Output Devices tab that the PORT Line Out (unplugged)
Here are the System Report details ...
Code:
===========================================================
Bios & Motherboard Information
===========================================================
BIOS:
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.3 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: 1.4.1
Release Date: 05/07/2007
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 1.4
MOTHERBOARD:
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.3 present.
Handle 0x0200, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 0YF432
Version: A02
Serial Number: ..CN137406BB00EK.
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.3 present.
Handle 0x0300, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Tower
Lock: Not Present
Version: Not Specified
Serial Number: 8GC79C1
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
===========================================================
CPU Information
===========================================================
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Architecture: i686
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 15
Model name: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
Stepping: 6
CPU MHz: 2394.237
BogoMIPS: 4788.47
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 4096K
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow dtherm
===========================================================
Memory Information
===========================================================
RAM SPEED:
Speed: 667 MHz
Speed: 667 MHz
Speed: 667 MHz
Speed: 667 MHz
PHYSICAL RAM DETAILS (one section per ram slot):
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.3 present.
Handle 0x1100, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_1
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: 7F7F7F7F7F510000
Serial Number: 04073610
Asset Tag: 440650
Part Number: 64T128020HU3SB
Handle 0x1101, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM_3
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: FFFFFFFFFFFFFFFF
Serial Number: FFFFFFFF
Asset Tag: FFFFFF
Part Number:
Handle 0x1102, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: DIMM_2
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: 7F7F7F7F7F510000
Serial Number: 04073517
Asset Tag: 440650
Part Number: 64T128020HU3SB
Handle 0x1103, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: None
Locator: DIMM_4
Bank Locator: Not Specified
Type: DDR
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: FFFFFFFFFFFFFFFF
Serial Number: FFFFFFFF
Asset Tag: FFFFFF
Part Number:
===========================================================
Graphics Chip Information
===========================================================
*-display
description: VGA compatible controller
product: G92 [GeForce 9800 GT]
vendor: NVIDIA Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a2
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
resources: irq:29 memory:de000000-deffffff memory:c0000000-cfffffff memory:dc000000-ddffffff ioport:dc80(size=128) memory:dbf00000-dbf1ffff
===========================================================
Sound Information
===========================================================
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: STAC9227 Analog [STAC9227 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
===========================================================
Hard Drive/SSD Information
===========================================================
Filesystem Type 1K-blocks Used Available Use% Mounted on
udev devtmpfs 1010824 0 1010824 0% /dev
tmpfs tmpfs 205972 6556 199416 4% /run
/dev/sda1 ext4 238115464 5060944 220935892 3% /
tmpfs tmpfs 1029856 158264 871592 16% /dev/shm
tmpfs tmpfs 5120 4 5116 1% /run/lock
tmpfs tmpfs 1029856 0 1029856 0% /sys/fs/cgroup
cgmfs tmpfs 100 0 100 0% /run/cgmanager/fs
tmpfs tmpfs 205972 36 205936 1% /run/user/1000Re: No Sound HDA nVidia STAC9227 Analog - torreydale - 09-24-2016
Consider the Configuration tab and choosing a different profile.
Re: No Sound HDA nVidia STAC9227 Analog - cptncc1701d - 09-25-2016
Thank you for the suggestion but I did try this with no luck.
Re: No Sound HDA nVidia STAC9227 Analog - torreydale - 09-25-2016
Consider the Sound section of the Help Manual found at Menu, Favorites, Help Manual.
Re: No Sound HDA nVidia STAC9227 Analog - arxontas - 09-25-2016
try
volume control config
analog stereo duplex
profile off
input devise
analog input
output the same
recording place aplications
playback system souds mono
hope it works..i had the same problem and maybe you be able to get sound back
arxontas
Re: No Sound HDA nVidia STAC9227 Analog - cptncc1701d - 09-25-2016
This morning I found that the sound was working.
All I did was reboot, I did not change any configurations nor did I touch the hardware. I also did not install any new software
What I see now is that the Line Out states that I am plugged in. It almost seems that the Linux Lite boot sequence doesn't always "recognize" or "initialize" the sound component properly. Any comments?
Re: No Sound HDA nVidia STAC9227 Analog - arxontas - 09-25-2016
make sure you save the settings . hit them to get blue then exit.. at list that's the way i thing will stay the same. maybe ...
arxontas..
Re: No Sound HDA nVidia STAC9227 Analog - trinidad - 09-26-2016
I always modify my systems, with system sound notifications that I create myself. I use my own startup sound files etc. I have noticed that occasionally when I login the startup sound doesn't play immediately, or gets interrupted as it plays through. This happens when wifi doesn't make its connection immediately. As long as wifi does or doesn't connect properly there is no issue, but when it hangs the startup sound file hangs too. Not a bug, just the way the OS takes care of its timed application startups during loading. A few times the old 2.8 system I had (which was overloaded with session startup applications) took long enough to load without sound. Uncheck the box on your wifi or ethernet connection that says always connect to this connection, so the system will load without trying to connect.
TC